Material

• Design & Cut: Create your desired design on compatible software, then mirror it. Cut the design on the vinyl side (not the carrier sheet) using a cutting machine.
• Weeding: Carefully remove excess vinyl from around your design using a weeding tool. Your design should be left on the clear carrier sheet.
• Preheat: Preheat your fabric for a few seconds to eliminate moisture and wrinkles. Place the garment on a heat-resistant surface.
• Position & Press: Position your weeded design on the fabric with the carrier sheet facing up. Apply even pressure using a heat press or an iron set to the recommended temperature. For best results we recommend 15 seconds at 325.
• Transfer: Press the design onto the fabric according to the recommended time and pressure settings. Allow it to cool slightly.
• Peel: Gently peel off the carrier sheet while it's still warm. If the vinyl lifts with the carrier sheet, re-cover and press for a few more seconds.
• Cooling: Allow the design to cool completely. Once cool, the adhesive will be fully set.
• Washing: Wait at least 24 hours before washing the fabric. Turn the garment inside out and wash in cold water. Avoid using bleach or harsh detergents. With these straightforward instructions, you'll master the art of heat transfer using AllDayVinyl Roll and create professional-quality, personalized projects that stand the test of time.
• Check out our Tik-Tok for other information and walkthrough @AllDayShirts
  
• Imported from China